CAN Cable J1939 Type 1 DEUTSCH Connector To DSub

PCM Cable Co., Ltd. is one of the leading can cable j1939 type 1 deutsch connector to dsub manufacturers and suppliers in China. Welcome to wholesale high quality customized products at discount price from our factory. Contact us for quotation and free sample.

 

CAN Cable J1939 Type 1 DEUTSCH Connector to DSub provides a reliable CAN cable routing solution for heavy-duty vehicle diagnostics and communications for SAE J1939 protocol applications.

 

 

Product name	CAN to J1939 Cable Type 1 with DEUTSCH Connector
Compatible with	Peak-system IPEK-003009
Drawing No.	PCM-CAN-004
Cable length	1m or customized
Connector 1	9-pin D-Sub socket
Connector 2	9-pole DEUTSCH connector (J1939 type 1 or 2)
Terminators	No
Data Rate	250 kbs
Wire gauge	24AWG
Cable diameter	4.8±0.2mm
Cable jacket	PVC, purple, UL2464, flame retardant
Insulation	Electronic grade flexible polyethylene insulation
Shield	Tinned copper shield for superior signal integrity
DB9 plug shell	9P Zinc alloy chroem plating
Screw	short screws #4-40

 

 

• J1939 DEUTSCH connector: Used to connect to J1939 system devices or nodes in heavy vehicles (such as construction machinery, tractors, agricultural machinery, etc.), providing a physical interface and electrical connection.

 

• DB9 connector: Typically used to connect CAN lines to CAN interface devices, such as PEAK CAN interface cards or other CAN analyzers, for data acquisition, analysis and diagnosis.

 

 

 

• Heavy vehicle industry: CAN-J1939 Adapter Cables can be used in construction machinery, tractors, agricultural machinery, etc.

   

• Diagnostic equipment: CAN Cable J1939 can be used for real-time data monitoring and fault diagnosis.

   

• CAN bus application: CAN Cable J1939 supports high-speed and high-stability data transmission requirements.

 

 

 

Q: What is the difference between J1939 type 1 and type 2?

 

A: The main difference between Type 1 and Type 2 of J1939 connectors is their physical compatibility and supported communication rates. Type 1 female connectors can only be inserted into Type 1 male sockets, while Type 2 female connectors are backward compatible and can be inserted into Type 1 and Type 2 male sockets. In addition, Type 1 connectors are applicable to the SAE J1939-13 standard and support communication rates up to 250K bits/second, while Type 2 connectors are applicable to the SAE J1939-14 standard, which adds support for 500K bits/second communication rates.

Hot Tags: can cable j1939 type 1 deutsch connector to dsub, suppliers, manufacturers, factory, customized, wholesale, quotation, free sample, CAN T Adapter, CAN Cable OBD 2 To DB9, can bus cable adapter, DB9 CAN Bus Terminal Adapter, Terminal Resistor 120 Ohm DB9 CAN Bus, CAN Bus Adaptor