CAN Bus Cable Non-terminated CAN Cable

PCM Cable Co., Ltd. is one of the leading can bus cable non-terminated can cable manufacturers and suppliers in China. Welcome to wholesale high quality customized products at discount price from our factory. Contact us for quotation and free sample.

 

This CAN Bus Cable Non-terminated CAN Cable is designed for CAN and CAN FD environments and is suitable for applications that require stable communication and reliability. Each cable is equipped with DB9 female connectors on both ends to facilitate direct connection to the device interface. This cable does not provide termination.

 

 

Product name	Connection Cable for CAN and CAN FD
Compatible with	CSS GC-CAN-CAB-2M-GC; Peak-system PCAN-Cable 1 IPEK-003000
Drawing No.	PCM-CAN-001
Cable length	2m or customized
Connector	9-pin D-Sub sockets at both ends
Wire gauge	24AWG
Cable diameter	4.8±0.2mm
Cable jacket	PVC, purple, UL2464
DB9 plug shell	9P Zinc alloy chroem plating
Screw	short screws #4-40

 

 

• Cable construction: This CAN cable consists of twisted 24 AWG copper twisted pair conductors for CAN signals.

 

• Insulation material: Electronic-grade flexible polyethylene insulation is used to ensure the stability and reliability of signal transmission.

 

• Shielding design: Tinned copper shielding effectively reduces the impact of external interference on the signal.

 

• Outer protection: Flame-retardant purple PVC sheath for additional physical protection and durability.

 

• Pin connection:

   CAN_L: Connected between pin 2 (male) and pin 2 (female) of DB9, used for low-speed differential signal line of CAN bus.
   CAN_H: Connected between pin 7 (male) and pin 7 (female) of DB9, used for high-speed differential signal line of CAN bus.
   CAN_GND: Connected between pin 3 (male) and pin 3 (female) of DB9, used for ground connection to ensure the connectivity of signal and electrical reference.

 

• Applicability: This Non-terminated CAN cable is suitable for the construction of CAN and CAN FD bus systems to ensure efficient and stable system communication.

 

 

• Automotive Electronics Systems: CAN cable can be used for communication between control units, sensors and actuators inside the vehicle, such as engine control, body control and driver assistance systems.

 

• Industrial Automation: CAN Bus Cable can be used for data transmission between factory automation equipment, such as PLC (Programmable Logic Controller), sensor networks and actuators.

 

• IoT Devices: CAN Bus Cable is used to connect and control smart devices, sensors and data acquisition modules, supporting remote monitoring and management.

 

• R&D and Testing: CAN Cable is used for CAN bus testing and data acquisition in a laboratory environment, supporting equipment performance evaluation, protocol analysis and system verification.

 

 

A terminator should be used at the end of each bus system to provide line balance and ensure optimal CAN signal transmission.

 

 

 

Hot Tags: can bus cable non-terminated can cable, suppliers, manufacturers, factory, customized, wholesale, quotation, free sample, USB C Female To Female Extension Cable, USB to RS232 Adapter with PL2303 Chipset, S PDIF Toslink Cable, Dashboard Flush Mount Audio Jack, DB9 Female to Blunt End, SSMB Male to SSMB Male RG196