Sub-D9 Connector With CAN Termination
CAN bus terminator
Terminating resistors
120 Ohm termination resistor CAN H and CAN L
Termination Resister in CAN network
Termination Resister in CAN network

Sub-D9 Connector With CAN Termination

Terminating resistors are often required in test setups when CAN nodes are not terminated. In contrast, most vehicle CAN buses are properly terminated.

Send Inquiry

Product Introduction

PCM Cable Co., Ltd. is one of the leading sub-d9 connector with can termination manufacturers and suppliers in China. Welcome to wholesale high quality customized products at discount price from our factory. Contact us for quotation and free sample.

This CAN bus termination resistor is a D-sub 9 pin male connector & female socket. It contains a 120 Ohm terminal resistor between the CAN High / CAN Low pins.

CAN DB9 120 Ohm Resistor

1. This product is a male-female adapter, which can be directly used for CAN tools with DB9 interface, with a built-in 120 ohm resistor between pins 2 and 7;

2. Once CAN_L or CAN_H is shorted to ground, it will cause the level to return to zero, and it will not form a high level at all. Be careful when purchasing. Once the inferior product is purchased, unnecessary communication problems will be encountered during testing.

Application of CAN bus

1. Application in automobile manufacturing

2. Application in large equipment

3. Application in industrial control

4. Application in smart home and living community management

5. Application in robot network interconnection

CAN bus termination resistor D-sub 9 pin male female connector