Introduction :
The XT60 2+4 connector is designed for battery-powered systems that need to carry main power and auxiliary signals through one connection. It combines two larger power contacts with four smaller contacts for low current circuits. This arrangement is used in RC and FPV drones, model aircraft, and custom battery assemblies where a single interface can handle power and selected monitoring or control connections.
The four auxiliary contacts do not have universal assignments. Their functions depend on the battery, controller, and equipment design, so the "2+4" layout should not be treated as a standard pinout.
How The XT60 2+4 Connector Is Used ?
The two larger contacts typically carry the positive and negative conductors of the main DC power circuit. The four smaller contacts provide paths for auxiliary functions such as battery voltage monitoring, temperature sensing, battery identification, enable signals, telemetry, or other low current feedback. The exact assignments must be defined by the equipment design.
By combining power and selected signals in one mated connector, the XT60 2+4 can reduce the need for separate power and signal plugs. It can simplify battery replacement and help keep a compact wiring harness organized. The auxiliary contacts should not be assumed to support a particular communication protocol unless the equipment documentation specifies it.
Primary Applications Of The XT60 2+4 Connector
-
RC and FPV Drones
XT60 2+4 connectors link drone batteries to ESCs or power distribution boards. The two main contacts supply propulsion power, while the four smaller contacts can support battery monitoring, temperature sensing, telemetry, or control signals. This combined interface simplifies wiring and allows quick battery replacement in compact airframes.
-
Model Aircraft and RC Vehicles
Model airplanes and RC vehicles use XT60 2+4 connectors to link batteries with motor controllers and onboard electronics. The main contacts deliver power, while the auxiliary contacts support monitoring or control functions. Combining these circuits in one connector simplifies battery installation and reduces separate connections.
-
Custom Battery Packs and Modules
Custom battery packs use XT60 2+4 connectors to combine DC power with auxiliary circuits. The smaller contacts can support temperature sensing, battery identification, status feedback, or enable signals. This arrangement suits OEM battery assemblies requiring a single interface for power and supporting signals.
-
Portable and Embedded Equipment
Portable test equipment, mobile platforms, and embedded devices can use XT60 2+4 connectors for combined power and signal connections. The main contacts supply DC power, while the auxiliary contacts connect to supporting electronics. This provides a convenient disconnect point for battery powered equipment.
What Should Engineers Confirm Before Choosing It ?
Before specifying an XT60 2+4 cable assembly, confirm:
1. Main power requirements: Operating voltage, current, polarity, conductor size, and contact ratings for the exact part.
2. Auxiliary pin assignment: The function and destination of each smaller contact. Do not rely on an assumed universal pinout.
3. Mating configuration: Male/female version, contact layout, and installation direction.
4. Cable construction: Cable length, power and signal wire selection, insulation, and strain relief.
5. Assembly and testing: Soldering requirements and checks for continuity, polarity, and correct signal mapping.
Custom XT60 2+4 Cable Assemblies from Premier Cable
Premier Cable can support custom XT60 2+4 cable assemblies for battery powered equipment. Cable designs can be matched to the required length, power and signal wire configuration, auxiliary pin assignment, and opposite end connection. Providing the connector part number, wiring diagram, or a sample cable helps define the assembly accurately.
Contact Premier Cable with your application and cable requirements to discuss a custom XT60 2+4 cable assembly.
You Might Also Like












