Introduction :
TE 2398010, 2398011, and 2398013 are three inline connector configurations in TE Connectivity's automotive USB Type-C 3.1 Gen 1 family. Their main differences are the connector end type and body orientation not the USB Type-C interface itself. The 2398010 is a straight male plug, the 2398011 is a straight female receptacle, and the 2398013 is a right-angle male plug. These distinctions affect how the connector mates with the vehicle-side interface and how the cable routes through a console, infotainment system, or electronic module.
This guide uses the (Z Code) version for all three part numbers: 2398010-5, 2398011-5, and 2398013-5.
TE 2398010, 2398011, and 2398013: Key Differences
Detailed Introduction to Connectors
-
TE 2398010-5: Straight Male Plug
The TE 2398010-5 is a straight (180°) male plug assembly, featuring a housing designed for male terminals. It serves as the straight-plug option in this comparison and is suitable for applications where a straight-plug interface is required for the cable. It can be used in automotive USB Type-C cable harnesses, making it ideal for installation layouts that require a straight cable exit.
-
TE 2398011-5: Straight Female Receptacle
The TE 2398011-5 is a 180° straight female receptacle. It features a female terminal housing design and is an ideal choice for cable assemblies that require a straight female receptacle connection rather than a male plug. It serves as a complementary connector type for in line cable connections. When finalizing a wire harness design especially when replacing an existing connector, it is essential to verify the mating connector drawings and terminal assignments.
-
TE 2398013-5: Right Angle Male Plug
The TE 2398013-5 is a 90 degree, right angle male plug assembly with a housing for male terminals. Its contact configuration is in the same general plug category as the 2398010-5, but the body turns the cable exit through a right angle.
This layout is useful when a straight connector would take up too much rear clearance or when the cable needs to follow a different route around a panel, bracket, or nearby component. Confirm the direction of the right-angle exit against the available space in the actual installation.
Custom Automotive USB Type-C Cable Assemblies
For an automotive USB Type-C cable assembly, connector selection is only one part of the design. The harness also needs the correct pin mapping, cable construction, length, shielding, and exit direction for the equipment layout. Premier Cable can help develop a custom cable assembly around the selected TE connector configuration and review the connection details before production.
Contact Premier Cable with the mating interface, target part number, cable length, and application requirements to discuss a suitable automotive USB Type-C cable assembly.











