Nov 16, 2026 Leave a message

GT17H-4S-2C Connector Keying Guide: Standard, Key A, B and C

Introduction :

 

The GT17H-4S-2C is a four position insulation case used in Hirose GT17H connector family. It is one component of the plug assembly, not a complete cable connector or finished cable assembly. A complete GT17H plug uses the insulation case with a housing, outer shell, retainer, and crimp contacts.

 

The insulation case is available in four mating key versions: Standard, Key A, Key B, and Key C. Each has a different molded keying profile and a designated color. Selecting the correct version allows the cable-side plug to mate with the corresponding equipment side connector. The GT17H/HN series is used in high speed data connections, including compatible USB 2.0 and LVDS applications.

 

Can Different GT17H Keying Types Mate With Each Other ?

GT17H

 

Do not assume that the Standard, A, B, and C keying versions are interchangeable. The plug on the cable end and its corresponding receptacle (or straight type receptacle) must feature matching keying configurations. The Hirose mating chart specifies the compatible combinations: Standard with Standard, A with A, B with B, and C with C.

 

The available mating connectors also depend on the connector type and mounting style. Not all keying options are applicable to every receptacle configuration. Before placing an order, please verify the keying code and the specific part number for the corresponding mating connector. Never attempt to force a connection if the keying profiles do not match.

 

Differences Between Standard, Key A, B and C 

These four types of insulating housings serve the same function within the plug assembly; the key differences lie in their mechanical/physical structures and their colors. The colors allow for rapid visual identification, while the molded positioning features serve to differentiate them in terms of mechanical mating.

 

Insulation case part number
GT17H-4S-2C
GT17H-4S-2C(A)
GT17H-4S-2C(B)
GT17H-4S-2C(C)
products GT17H-4S-2C GT17H-4S-2CA GT17H-4S-2CB GT17H-4S-2CC
Key option Standard Key A Key B Key C
Color Light gray Brown Green Blue
Key differences the key difference lies in the mechanical structure of this housing.

 

How to Choose the Correct GT17H-4S-2C Key

1. Confirm the equipment side part number. Check the connector label, equipment documentation, bill of materials, or manufacturer drawing for the specified mating key.

 

2. Confirm the connector family and layout. Verify that the equipment uses the single row GT17H four-position interface, not a double-row GT17HN part.

 

3. Match the key configuration. Select Standard, A, B, or C according to the mating connector drawing. Use color as a secondary check.

 

4. Verify the complete interface. Check connector style, mounting arrangement, and pin assignment. Keying defines the mechanical mating configuration; it does not define the electrical pinout.

 

5. Check cable requirements. For USB 2.0, LVDS, or another supported interface, confirm pin mapping, cable construction, length, and connector combination against the device specification.

Hirose GT17H Series High Speed Data Cable

 

Custom GT17H Four Position Cable Assemblies

Premier Cable can customize GT17H four position cable assemblies with the required Standard, Key A, Key B, or Key C configuration. Custom options include connector combinations, cable length, wire construction, pinout, and cable routing.

 

For USB 2.0 or LVDS applications, the assembly can follow the device's wiring requirements. To review a project, provide the equipment model, mating connector part number or drawing, pin assignment, required cable length, and a reference sample or cable drawing when available.

 

Selecting the correct key at the component stage helps ensure that the finished cable assembly matches the equipment interface. Contact Premier Cable with your connector details or drawings to discuss a custom GT17H cable assembly.

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry