M8 Splitter vs M12 Splitter: What's the difference?

M8 and M12 splitters are two common industrial connectors that differ in the following aspects:

• M8 splitters use M8 circular connectors and are suitable for smaller connection needs.

• M12 splitters use M12 circular connectors and are usually used in applications that require higher current and higher data transfer rates.

• M8 splitters usually have fewer pins, usually 2 to 4 pins.

• M12 splitters can have more pin options, usually 3 to 8 pins, suitable for more complex connection and control needs.

• M8 T splitters are common in smaller devices or space-constrained applications, such as some lightweight sensors and controllers.

• M12 T splitters are widely used in industrial automation, robotics, and heavy equipment, and can provide more stable connection and transmission performance.

• M12 connectors usually have higher protection levels (such as IP67 or IP68) and are suitable for harsh environmental conditions, such as wet or dusty industrial sites.

• The M8 connector has a lower protection level and is suitable for use in relatively dry and clean environments.

In general, the choice of M8 or M12 splitters depends on the specific application requirements, including the number of pins required, transmission performance requirements, and environmental conditions.

Minifast 7/8"-16UNF Tee h Y Splitter

Minifast 7/8"-16UNF MPIS Distribution Box

DeviceNet Cables And Adapters

M12 Tee h Y Splitter

NMEA2000 Tee Connectors

DeviceNet Profibus Power Supply Cables