Mini FAKRA Male to Female Coaxial Cable

PCM Cable Co., Ltd. is one of the leading Mini FAKRA Male to Female Coaxial Cable manufacturers and suppliers in China. Welcome to wholesale high quality customized products at discount price from our factory. Contact us for quotation and free sample.

Premier Cable PCM-ZC-0178 is designed not merely as a four-way breakout but as a mixed-gender interface transition. A Rosenberger AMS11D-1M4Z5-Z quad HFM/Mini FAKRA plug is connected to four 59Z113-000-Z FAKRA jacks, allowing a high-density male interface to transition directly into four individual female connection points. This configuration can reduce additional gender adapters where the mating equipment uses opposite connector orientations.

 

Four independent 50Ω coaxial signal paths are maintained throughout PCM-ZC-0178. Each HFM cavity maps directly to a designated FAKRA female interface with separate center-conductor and shield paths. Therefore, "4 In 1" represents channel consolidation rather than one-to-four signal duplication. LEONI DACAR 302-4 automotive coax is used, with the finished assembly specified for DC–3GHz, 50Ω nominal impedance and VSWR ≤1.80.

Quad HFM High-Density 4-Channel Integration

A Rosenberger AMS11D-1M4Z5-Z quad HFM plug consolidates four independent coaxial channels into one compact interface. Compared with arranging four conventional FAKRA connectors side by side, it reduces connector footprint around HPCs, ADAS ECUs and central computing modules while preserving clear one-to-one channel mapping.

4 FAKRA Female Direct Device Connections

Four Rosenberger 59Z113-000-Z FAKRA jacks provide independently mapped female interfaces for compatible cameras, RF modules and test equipment. The HFM male-to-FAKRA female configuration reduces additional gender adapters and intermediate connection points, simplifying BOM, installation and servicing.

Independent DACAR 302-4 50Ω Coaxial Paths

Four LEONI DACAR 302-4 automotive coaxial paths maintain independent center conductors and shielding, with the complete assembly specified for 50Ω nominal impedance, DC–3GHz operation and VSWR ≤1.80. The separated channels simplify identification, individual validation and fault isolation for camera, RF and video applications.

150mm Short Link & OEM Customization

The standard 150±5mm length is optimized for short-range connections among nearby HPCs, ECUs, camera controllers and test modules, reducing excess cable and unnecessary extensions. For OEM programs, cable length, branch dimensions, HFM/FAKRA plug-jack combinations, coding, channel mapping and labeling can be configured to match specific equipment interfaces.

HPC & Camera Controller Adaptation

 

Suitable for high-performance computing platforms, central computers, ADAS vision processors and camera controllers requiring different HFM and FAKRA mating orientations. The 150mm harness connects adjacent modules directly, consolidating four coaxial channels through a quad HFM male interface and distributing them through four FAKRA female branches to cameras, video processors or sensor modules. This reduces extra gender adapters, shortens the physical link and simplifies cable management inside compact electronic assemblies.

Automotive R&D & Multi-Channel Validation

 

Ideal for ADAS laboratories, camera validation benches, HIL systems, automotive RF test platforms and prototype vehicle development. PCM-ZC-0178 creates a clear four-channel coaxial transition when test hosts, acquisition equipment and DUTs use different HFM/FAKRA mating orientations. Engineers can independently access four 50Ω links for channel mapping, camera validation, RF video testing, interface compatibility checks and fault isolation, while reducing cable clutter and simplifying DUT replacement.

Q1: This cable links a male to a female terminal; what is its specific function inside automotive RF layouts?

A1: In modern vehicular electronics, dense domain controller motherboards host surface-mount male ports nested deeply inside hulls. Thick long mainline cables, when routed directly into those tight slots, exert immense bending strain that can crack the motherboard trace pads. This PCM-ZC-0178 implements a male-to-female asymmetric topology, serving perfectly as a "lossless high-frequency mid-span extension buffering line." Technicians dead-lock the male plug into the motherboard socket once, extending the interface out by 0.15m to accept long mainlines at the open female end, protecting pricey board-mount interfaces from wear and stress.

Q2: Though only 0.15m long, it adds a male-to-female mating face; will this drastically increase VSWR and attenuation, causing video flicker?

A2: Splicing via common routines alter dielectric constants, triggering fatal impedance pulse reflections. Premier Cable overcomes this by optimizing internal wire junctions and terminal mating faces via micro-scale EM simulation layout, and layering a high-density, fully enclosed metallic shield over both terminations. This clamps insertion loss and Voltage Standing Wave Ratio (VSWR) well inside safe vehicle guidelines, flawlessly guiding uncompressed HD video streams at 20GHz limits.

Q3: With this 4-in-1 high-density matrix running concurrent hyper-frequency RF or microwave streams, will channels experience severe internal Near-End Crosstalk?

A3: Absolutely not. Our manufacturing pipeline deploys a heavy-duty dual-layer shield combining separate high-density aluminum foil wrapping per coax branch and an overall high-density copper braiding mesh shield, bonded 360-degree comprehensively to ground lines. This creates a rigid physical barrier against Near-End Crosstalk (NEXT), ensuring full concurrent traffic runs independent and pristine without data cross-contamination.

Hot Tags: Mini FAKRA Male to Female Coaxial Cable, suppliers, manufacturers, factory, customized, wholesale, quotation, free sample