RJ45 Male to Dual XLR Female Splitter Cable
PCM Cable Co., Ltd. is one of the leading RJ45 Male to Dual XLR Female Splitter Cable manufacturers and suppliers in China. Welcome to wholesale high quality customized products at discount price from our factory. Contact us for quotation and free sample.
PCM-KW-664 is an RJ45 8P8C Male to Dual XLR 3-Pin Female Breakout Cable developed for broadcast audio, AoIP infrastructure, and professional studio systems. One end features an RJ45 male connector for compatible broadcast equipment, while the other branches into two standard XLR 3-pin female connectors for connection with mating XLR male interfaces.
Designed primarily for AXIA equipment, it is also compatible with properly matched Telos Alliance, Wheatstone Blades, Logitek Jetstream, Arrakis, and Audio Arts systems. Its 2-meter shielded construction provides practical routing distance between workstations, audio nodes, consoles, and adjacent equipment racks.
Dual-Channel Interface Architecture
PCM-KW-664 uses an RJ45 8P8C male connector as the centralized interface and separates the opposite end into two independent XLR 3-pin female branches. This architecture presents the RJ45-side wiring as two clearly identifiable audio channels for professional equipment. The integrated 2-meter cable provides practical positioning freedom between audio nodes, broadcast consoles, and peripheral processors, while the dual XLR female connectors mate directly with corresponding XLR male interfaces for clear channel organization and adjustment.
Shielded Link Integrity & Installation Control
For broadcast environments where power, data, and audio cables are densely routed, PCM-KW-664 uses shielded construction to maintain a continuous 2-meter audio connection path for two channels. During deployment, verify the RJ45 pin assignment, XLR channel mapping, and polarity according to the AXIA or target equipment documentation, then select the appropriate balanced or unbalanced wiring method. Proper bend control, cable securing, and separation from high-power wiring further support stable termination and long-term connection integrity.
Products Specification
| Product Name | Dual XLR 3Pin Female to RJ45 8P8C Male Audio Cable |
| Drawing Number | PCM-KW-664 |
| Connector P1-P2 | XLR 3Pin Female, Nickel Plated |
| Connector P3 | RJ45 8P8C Male with Shield |
| Overall Length | 2000±30mm |
| Cable Type | NON-UL |
| Conductor Size | 24AWG × 2C |
| Cable OD | Ø6.0±0.12mm |
Products Display
Product Features
◆ 2-Meter Low-Friction High-Flex Long-Run Body
Features a full 2-meter physical layout coated with low-drag modified slick PVC, purpose-built for frictionless pulling inside long-haul conduits or underground duct networks.
◆ Heavy-Retention 3-Pin XLR Female Sockets
The remote end is armed with dual standard XLR female ports incorporating thick gold-plated, high-retention spring contacts and integrated all-metal push-latch locks.
◆ Tiered Strain-Relief Overmolded RJ45 Male Plug
The input uses a tiered, multi-stage gradient molded boot on the RJ45 male plug, bound internally with premium polycarbonate shells and extra-thick gold-plated pins.
◆ Four-Pair Twisted Matrix Enclosed Inner Braiding
Internal core conductors follow standard symmetric twisted-pair topography, enveloped by a high-density, closely woven counter-wrapped OFC shielding grid.
Core Application Scenarios
Wheatstone Blade Expansion Routing
PCM-KW-664 is suitable for connecting compatible Wheatstone Blade broadcast infrastructure with conventional analog audio equipment. Its RJ45 male interface branches into dual XLR 3-pin female connectors for routing toward remote patch panels, audio processing modules, or hybrid input stages. The 2-meter cable provides flexible reach between the main rack and peripheral equipment, while two independent XLR connections simplify channel identification, integration, and management during broadcast upgrades and hybrid audio system expansion.
Telos Alliance Cross-Rack Patching
PCM-KW-664 supports cross-rack interconnection between compatible Telos Alliance broadcast equipment and analog peripherals in the control room. Its RJ45 8P8C male to dual XLR 3-pin female configuration extends two audio connections to microphone preamps, effects processors, analog modules, or other XLR male-equipped devices within a practical 2-meter range. The shielded construction suits cable-dense control rooms and provides greater flexibility for analog source integration, equipment relocation, and broadcast rack reconfiguration.
Core Performance Advantages
Lossless Front-End Capture Over 2m Spans
The multi-strand core minimizes distributed capacitance, ensuring microvolt-level inputs or high-frequency AES/EBU digital streams retain a flat amplitude-frequency curve over 2m runs.
Deep Isolation of Cross-Zone Ground-Loop Currents
Utilizing a fully isolated floating shield design at the Y-junction, it cuts off case potential differences induced by 2-meter cross-rack wiring, preventing AC hum from entering input stages.
Constant Impedance for Multi-Brand Input Matrices
Flawlessly addresses the capacitive and inductive characteristics of Livewire and WheatNet-IP front-ends, entirely neutralizing waveform reflection distortion at the 2m splitting junction.
Omni-Directional Interlocked Pull-Proof Security
The standard push-latches on the XLR female ports and the resilient clip on the RJ45 male plug lock securely, resisting gravitational drag and accidental kicks during long spans.
Frequently Asked Questions
Q1: This cable is 2 meters long and has a splitter design with "Female" XLR inputs. Will long-distance splitting cause high-frequency distortion due to impedance fluctuations?
A1: Absolutely not. This cable (PCM-KW-664) incorporates heavy-gauge pure Oxygen-Free Copper (OFC) cores and utilizes high-precision physical balancing at the Y-junction breakout point to maintain impedance uniformity. Over a 2-meter physical layout, its distributed capacitance and inductance remain completely linear, effortlessly handling balanced analog inputs and guaranteeing that high-frequency digital audio streams (like 110-ohm AES/EBU signals) suffer zero pulse-waveform deformation during concurrent splitting.
Q2: For this 2m cable, how are its internal pinouts mapped from the single RJ45 male connector to the dual XLR female ports?
A2: The assembly follows standard international broadcast AoIP physical interface formatting. The 8 pins (Pins 1-8) of the RJ45 male plug are precision-demodulated and bifurcated into two separate dual-channel balanced fabrics. Channel A/Left (Hot/Cold/GND) and Channel B/Right (Hot/Cold/GND) map directly to the respective XLR female Pin 2 (+), Pin 3 (-), and Pin 1 (GND), ensuring the electrical polarities are 100% compatible with the hardware topologies of AXIA Nodes and Wheatstone Blades.
Products Drawing
Get In Touch
Hot Tags: RJ45 Male to Dual XLR Female Splitter Cable, suppliers, manufacturers, factory, customized, wholesale, quotation, free sample, 3 5mm Aux to RJ45 Adapter, DB9 to 4 Channel XLR Digital AES Cable, Network Interface to XLR Audio Cable, Networking Cable with RJ45 to RCA, XLR BREAKOUT CABLE DB15, XLR to RJ45 Adapter Converter Extension Cable
You Might Also Like
Send Inquiry