Micro-D 25 Pin to DB25 Cable Compatible Pickering A025CFR-025DMR-5A180
PCM Cable Co., Ltd. is one of the leading Micro-D 25 Pin to DB25 Cable Compatible Pickering A025CFR-025DMR-5A180 manufacturers and suppliers in China. Welcome to wholesale high quality customized products at discount price from our factory. Contact us for quotation and free sample.
PCM-S-0790 bridges a high-density 25-circuit Commercial Micro-D interface directly to a standard DB25 connector. The compact Micro-D end suits densely packaged DAQ cards, test modules and embedded controllers, while the DB25 end interfaces with compatible instruments, I/O hardware and legacy equipment.
A single 25-circuit Micro-D to DB25 cable can consolidate equipment-defined acquisition, control, trigger and feedback channels, simplifying mixed-interface test and control systems.
● Core Advantages
As Premier Cable's premium engineering milestone in crossover hybrid interconnections, this runner delivers a flawless 1:1 cross-size expansion from a 1.27mm micro-pitch Micro-D (male) to a 2.77mm standard D-Sub 25-pin (female) profile. Engineered to eliminate data distortion at hybrid nodes, it optimizes linear characteristics to anchor asymmetric impedance fine-tuning consistency, severely curtailing waveform reflections across industrial multi-channel monitoring network nodes during Pickering PXI/LXI switch matrix interlinks.
● Stable Connection
Countering aggressive transient voltage surges emitted during high-density matrix relay switching, this heterologous harness implements a heterogeneous loop total-state closed anti-noise grounding layer. Stamped grounding dimples on both the Micro-D and standard DB25 steel brackets secure a 360-degree seamless electromagnetic wrap upon mating. Combined with a dense multi-shielding layer, it establishes a robust high-and-low-frequency broadband transient noise hardwired defense to eradicate packet loss.

Products Specification
| Product Name | DB25 to Micro DB25 25-Pin Male-to-Male Shielded Cable |
| Drawing Number | PCM-S-0790 |
| P1 Connector | Standard DB25 Male |
| P2 Connector | Micro DB25P Male |
| Pin Count | 25-Pin 25-Pin |
| Wiring Method | 1:1 Straight-Through |
| Standard Length | 2000 + 30mm |
| Wire rod | UL2464 |
| Conductor Specifications | 28AWG x 25C |
| Cable Outer Diameter | OD 8.0mm |
Compatible
Molex:
★ PCM-S-0790 -0.45M Compatible Molex 834249060
★ PCM-S-0790 -0.9M Compatible Molex 834249061
★ PCM-S-0790 -1.83M Compatible Molex 834249062
★ PCM-S-0790 -2.5M Compatible Molex 834249067
Pickering:
★ A025CFR-025DMR-5A180
Products Display

Product Features
Micro-D Male to DB25 Female Matrix
Integrates a 1.27mm Micro-D male and a 2.77mm standard DB25 female for seamless heterogeneous serial bus linear relaying [A025CFR-025DMR-5A180].
Dual Stamped Dimple Metal Envelopes
Both multi-size steel front brackets integrate raised grounding dimples to automatically secure cross-cabin shell grounding closure and seamless shield continuity.
Braided-Plus-Dual-Foil Omnidirectional Shield
Dense copper braid overlapping multi-layer aluminum foils constructs a 360-degree closed electromagnetic shielding barrier isolating high-frequency inverter spikes.
Asymmetric Jackscrews & Hexagonal Iron Nut Retainers
Outfitted with micro-slotted jackscrews on the micro-end and deep-threaded hex iron nuts on the standard end for versatile reliable locking inside narrow frame pockets.
Core Application Scenarios

ATE Semiconductor Platforms
Designed for IC test handlers, semiconductor burn-in systems, wafer test equipment, and large-scale PCB functional test (FCT) fixtures requiring multi-channel signal interconnection. PCM-S-0790 uses a 25-pin Commercial Micro-D female to standard DB25 male configuration to route compact test-card or high-density I/O interfaces to compatible DB25 instruments, switching modules, fixture terminal boards, or rack panels. It supports equipment-defined test stimulus, digital I/O, trigger, feedback, and data acquisition signals while helping integrate compact modern test hardware with existing ATE infrastructure.
Distributed DCS & PLC Cabinet Upgrades
Suitable for DCS, PLC, and industrial control cabinet upgrades in petrochemical, power, metallurgy, smart manufacturing, and automated production environments. PCM-S-0790 connects modern high-density control cards, remote I/O modules, or embedded controllers to existing DB25 patch panels, terminal modules, and compatible legacy equipment. The compact Micro-D end reduces interface footprint on new hardware, while the standard DB25 end helps preserve existing D-Sub infrastructure, supporting phased system modernization without requiring complete cabinet rewiring.

Core Performance Advantages
◆ Eradicating Signal Waveform Reflections over Hybrid Nodes
Precisely managed inter-wire capacitance properties guarantee distortion-free pulse edge retention for 25 circuits over large-span interfaces.
◆ Thwarting Telemetry Corruptions from Inverter Radiations
Highly conductive heterologous shell grounding paths shield delicate micro-DAQ hardware from inverter-driven transient spikes and impedance discontinuities.
◆ Neutralizing Cross-Talk Over Concurrent Multi-Circuit Paths
Proprietary twisted core layouts decouple distributive capacitance, eliminating mutual inductive crosstalk at the dense 25-pin cluster root.
◆ Driving Physical Depreciation of Host Sockets to Absolute Zero
Shifts mating abrasions to the external cord, mitigating expensive host PXI switch board motherboard socket failure risks during routine teardowns.

Frequently Asked Questions
Q1:Are Micro-D 25 Pin and DB25 the same connector?
A1:No. Both have 25 positions, but their physical dimensions, contact spacing and retention structures differ. PCM-S-0790 bridges these two connector formats.
Q2:Does the DB25 end automatically mean RS-232?
A2:No. DB25 defines the connector format only. Actual signals may include digital I/O, test, control or application-specific circuits depending on the equipment pinout.
Q3:Are custom cable lengths available?
A3:Yes. In addition to the approximately 1.8m reference configuration, custom lengths, pinouts, shielding and labeling can be specified for OEM test and measurement applications.
Products Drawing

Get In Touch

Hot Tags: Micro-D 25 Pin to DB25 Cable Compatible Pickering A025CFR-025DMR-5A180, suppliers, manufacturers, factory, customized, wholesale, quotation, free sample, Automotive Power Supply 4 Pin, Ex Link Programming Cable DB9 3 5mm TRS, Micro Fit 6 Pin Cable, Molex Micro Fit 8 Pin To M12 Overmolded Female Connector Cable, Rectangular Cable Assemblies Microfit TPA 8CKT DR CBL ASSY, Serial DB9 breakout cable
You Might Also Like
Send Inquiry













