USB To RS485 Converter Cable With 4 Pin Open Wire Ferrules

PCM Cable Co., Ltd. is one of the leading usb to rs485 converter cable with 4 pin open wire ferrules manufacturers and suppliers in China. Welcome to wholesale high quality customized products at discount price from our factory. Contact us for quotation and free sample.

 

The USB to RS485 Converter Cable with 4 Pin Open Wire Ferrules provides a direct communication connection between a computer and industrial equipment using an RS485 interface. It is designed for servo motor configuration, PLC communication, industrial automation, and equipment maintenance.

 

Unlike a standard USB cable, this assembly integrates a USB to RS485 conversion module inside the USB connector. It converts USB communication data from a PC or industrial computer into RS485 differential signals, allowing users to communicate with compatible servo drives, motor controllers, PLCs, sensors, and other industrial devices.

 

The opposite end features four open wires with ferrule terminals for direct connection to screw terminal blocks and industrial control cabinets. This design simplifies field wiring and provides a practical interface for equipment programming, parameter configuration, monitoring, and troubleshooting.

 

 

Product Type	USB to RS485 Converter Cable
Communication Interface	RS485
USB Connector	USB Type-A
Cable End	4 Pin Open Wire with Ferrules
Cable Type	4-Core 22AWG
Baud Rate	300bps–1Mbps
Cable Length	1.5m or customized
Terminal Matching	Built in 120Ω resistor
Converter Chip	Integrated inside USB connector
USB Standard	USB 2.0 Full Speed, compatible with USB 1.1

 

 

The USB to RS485 Converter Cable provides a communication link between a computer and RS485 compatible industrial equipment. Its integrated converter chip converts USB data from the computer into RS485 differential signals, which are transmitted through the cable to the connected device. This allows users to access industrial equipment from a PC for programming, parameter configuration, data monitoring, and troubleshooting.

 

When the USB A connector is plugged into a computer, the converter module handles the USB to RS485 signal conversion. The RS485 wires are then connected to the corresponding terminals on the industrial device, establishing a communication connection for data exchange.

 

The fourth conductor has no assigned function in the available wiring information. Its purpose should be verified against the product specific wiring diagram before connection.

 

Correct wiring polarity is essential for reliable RS485 communication. RS485+ and RS485- must be connected to their corresponding device terminals. Reversing these two signal wires may prevent communication between the computer and the connected equipment.

 

 

 

Premier Cable provides industrial communication cable assemblies for servo motors, PLC systems, and industrial automation equipment. Our USB to RS485 converter cable combines an integrated communication module with a four-wire ferrule termination design, providing a practical connection for computer based equipment configuration and maintenance.

 

For OEM projects and specific equipment interfaces, Premier Cable can discuss customized cable lengths and wiring configurations according to customer requirements.

 

When requesting a customized assembly, provide the target device model, RS485 wiring diagram, terminal requirements, cable length, and intended application. These details help establish the appropriate cable configuration for your equipment.

 

Contact Premier Cable to discuss your USB to RS485 converter cable requirements and customized industrial communication cable solutions.

 

 

Hot Tags: usb to rs485 converter cable with 4 pin open wire ferrules, suppliers, manufacturers, factory, customized, wholesale, quotation, free sample