Up Angle IX to RJ45 Cat6A Cable
PCM Cable Co., Ltd. is one of the leading Up Angle IX to RJ45 Cat6A Cable manufacturers and suppliers in China. Welcome to wholesale high quality customized products at discount price from our factory. Contact us for quotation and free sample.
Premier Cable PCM-HD-0292 is an IX Industrial CAT6A Ethernet cable assembly developed for factory automation, machine vision, robotics, industrial switches and advanced networking equipment.
The cable features an IX A-Key right-angle upward plug on one end and a standard RJ45 Cat6A male plug on the other, providing direct point-to-point connectivity between next-generation IX Industrial equipment and traditional RJ45 Ethernet devices without requiring an additional Keystone module or adapter panel.
Compared with conventional RJ45 equipment-side connections, IX Industrial provides a much smaller interface footprint, making it particularly suitable for industrial cameras, embedded controllers, edge computers and high-density switches. The 90° CVL2 cable exit further reduces rear clearance by redirecting the cable immediately after the connector.
Its CAT6A S/FTP construction supports Ethernet data rates up to 10Gbps, making it suitable for high-resolution machine vision, automation control data and other bandwidth-intensive industrial communication applications.
Core Advantages
As a masterpiece of Premier Cable's compact direct-connect solutions, the PCM-HD-0292 is engineered to shatter the contradiction between space constraints and high bandwidth. The core edge of this patch cord lies in the synergy of its streamlined male-to-male architecture and 90° right-angle routing. It bypasses intermediate adapters, offering a direct, highly efficient link for miniaturized smart factory integration.
Stable Connectivity
In hyper-critical industrial Ethernet (e.g., EtherCAT, Profinet, Modbus/TCP) communication, tiny impedance variations turn into catastrophic packet drops. The PCM-HD-0292 maintains symmetry within its internal 26AWG differential pairs and dense braid shield during the 90° physical turn. This fully closed shielding chain erects a Faraday cage, securing error-free transmission of 10Gbps traffic over a 500MHz bandwidth.
Installation Requirements
★ Critical Engineering Notice:
This product deploys a specialized IX A-Key CVL2 right-angle setup, where the cable routing direction runs opposite to the plug's Pin 1 position (90° upward). Designers and procurement staff must double-check the Pin 1 orientation of their chassis receptacles using technical layouts to prevent irreversible physical interference with upper DIN-rail units or enclosures.
Products Specification
| Product Type | IX Industrial A-Key Right-Angle Up to RJ45 Cat6A Ethernet Cable |
| Part No. | PCM-HD-0292 |
| Connector P1 | IX30G-A-10S-CVL2(7.0) A-Key or IX40G-A-10S-CVL2(7.0) A, 10-Pin Male |
| Structure P1 | 90° Right-Angle Upward |
| Connector P2 | RJ45 8P8C Male |
| Type P2 | Cat6 FTP Type |
| Cable Category | CAT.6A SFTP |
| Length | 2000 + 30 mm |
| Structure | 26 AWGx1P+AL.MYLAR x 4P + Drain+ Braid + Paper |
| Cable Outer Diameter | 6.5 ± 0.2 mm |
Products Display
Product Features
-
Dual-Male Direct Patch Setup
Features a 90° right-angle IX A-Key plug to a standard RJ45 physical maleconnector, enabling direct point-to-point patching between active hardware withoutinterim modules
-
Reverse Angle Boot Profile
The plug utilizes a CVL2 architecture where the cable exits strictly opposite toPin 1 (90° upward), freeing up vertical wire pathways without compromisinghorizontal depth.
-
26AWG Finely Stranded Core
Built with 26AWG industrial-grade finely stranded copper conductors, offeringhigher pliability and a tighter bend radius than stiff solid wires for dynamic tracks.
-
Backward Compatible Gigabit/10G Engine
Fully compliant with Cat6A Ethernet channel criteria, delivering full 10Gbpsdata throughput while seamlessly backward compatible with legacy 1000BASE-Tnetworks.
Core Application Scenarios
Ultra-Slim Industrial Ethernet Switches
Ideal for DIN-rail ultra-slim industrial Ethernet switches, high-density networking equipment and compact control cabinet installations. These systems often require multiple high-speed Ethernet ports within very limited panel and enclosure space, where conventional straight-exit RJ45 cables may consume excessive rear clearance or create cable congestion.
PCM-HD-0292 combines a compact IX Industrial A-Key interface with a right-angle upward cable exit, allowing the cable to change direction immediately behind the connector and reducing the clearance required around densely arranged switch ports. Its CAT6A 10Gbps capability and S/FTP shielding make it suitable for high-speed connections between industrial switches, PLCs, industrial PCs, edge controllers and other Ethernet equipment while helping reduce EMI from drives, power supplies and servo systems.
Multi-Axis Robots & Mobile AGV Platforms
The right-angle IX A-Key design of PCM-HD-0292 reduces the clearance required behind robotic joints and control modules, allowing the cable to follow the internal mechanical structure more naturally while minimizing forced bending and localized stress near the connector. Its 26AWG stranded conductors and flexible TPU construction are also well suited to dynamic industrial routing.
For AGV and AMR platforms, the cable can provide direct Ethernet connections between onboard LiDAR sensors, industrial cameras, navigation sensors, edge computing controllers and vehicle Ethernet gateways. The RJ45 male side connects directly to conventional gateways or industrial switches, while the compact IX Industrial side supports next-generation sensors and control devices, helping combine high-speed communication, compact installation and legacy-network compatibility.
Core Performance Advantages
Mitigating Stress on Hardware Ports
The 90° exit allows the cable to align naturally with gravity and wire ductseliminating continuous mechanical leverage stress imposed on expensive board-level receptacles
Multi-Layer Blind Shielding Against Heavy EMI
Relying on an SFTP (individually foiled pairs + overall high-density braid) fullyshielded build, this patch cord blocks intense electromagnetic and radio interference(EMI/RFI).
Heavy-Duty Vibration Resistance via Dual Process
Offers both IDC displacement (IX30G) and precision soldering (IX40G) securetermination processes, paired with an IX metal latch to ensure contact resistancenever drifts under multi-axis vibration
Frequently Asked Questions
Q1：Is there a difference in performance or durability between the soldered (IX40G) and IDC crimped (IX30G) versions? How should I choose?
A1：There is zero difference between the two regarding electrical performance, 10Gbps traffic handling, or mechanical flex life. They merely represent different internal factory assembly processes by Premier Cable. Both undergo strict overmolding encapsulation and pull testing, imparting zero impact on your field operations or signal integrity.
Q2：This cable has male plugs on both ends. How does its application value differ from models with a Keystone female jack?
A2：Models with a Keystone jack are intended for "chassis bridging or panel mounting," delivering a fixed bulkhead port. In contrast, the PCM-HD-0292 male-to-male cord is optimized for "point-to-point direct linkage"-for instance, patching an industrial camera straight into a switch without extra plates, cutting clutter and insertion loss.
Q3：Can this 26AWG stranded copper patch cord handle high-power PoE++ (e.g., 60W or higher) power delivery?
A3：Absolutely. Despite being high-flex stranded wires, Premier Cable deploys high-purity oxygen-free copper conductors matched with ultra-low contact resistance junctions, yielding superb thermal and electrical performance. It fully meets IEEE 802.3bt standards to deliver heavy-duty power safely to hungry smart cameras or LiDAR nodes.
Products Drawing
Get In Touch
Hot Tags: Up Angle IX to RJ45 Cat6A Cable, suppliers, manufacturers, factory, customized, wholesale, quotation, free sample, In car Entertainment System Connector Cable HSD To IX Industrial Plug
You Might Also Like
Send Inquiry