Nov 17, 2026 Leave a message

Rosenberger E6K14M H-MTD Waterproof Hybrid Connector for Automotive LiDAR Applications

Introduction :

 

Automotive LiDAR sensors send high-volume measurement data to ADAS computers while requiring dependable power and signal connections in compact vehicle installations. The Rosenberger E6K14M-1CAZ5-Y is a waterproof H-MTD straight jack that combines a high speed differential interface with six additional MQS contacts. In a LiDAR cable assembly designed for this interface, data and additional electrical connections share one hybrid connector.

 

 

What Is the Rosenberger E6K14M H-MTD Connector ?

Automotive LiDAR Cable

Rosenberger describes the E6K14M-1CAZ5-Y as a straight jack with MQS contacts and Connector Position Assurance (CPA). The H-MTD + 6 catalog lists this configuration with two signal pins and six power pins. The H-MTD interface provides the differential data connection, while the six MQS contacts provide additional power connections defined by the sensor or vehicle wiring design.

 

This arrangement is useful when a LiDAR module needs a high-speed data link and separate power circuits but the installation favors one connector. It can reduce the need for separate data and power connectors at the sensor connection point. The exact function assigned to each MQS contact must follow the LiDAR manufacturer's wiring diagram; the connector specification does not define the application pinout.

 

Key Technical Specifications

 The Rosenberger datasheet lists the following values for E6K14M-1CAZ5-Y:

Connector type H-MTD straight jack with MQS contacts and CPA
Contact arrangement 2 signal pins + 6 power pins
Impedance 100 Ω
Frequency range DC to 10 GHz
Working voltage 60 V DC
Current rating H-MTD: ≤1.5 A DC; MQS: ≤5.0 A DC*
Temperature range -40°C to +105°C
Retention force Latch: ≥110 N; primary lock: ≥80 N

 

How It Works in an Automotive LiDAR Cable

A LiDAR unit measures its surroundings and sends sensor data to an ADAS ECU, domain controller, or central computing platform. In an H-MTD based system, the differential pair forms the high speed data path. The additional MQS contacts can be assigned to the required power circuits, keeping these connections within the same connector body.

 

The E6K14M is relevant to automotive LiDAR cable assemblies where the sensor-side interface specifies a waterproof H-MTD + 6 jack. It may also suit related radar and camera harnesses built around the same connector architecture.

 

Rosenberger positions the wider H-MTD platform for driver assistance systems, autonomous driving, and high resolution camera applications. The H-MTD family supports Automotive Ethernet and several SERDES technologies, but the actual link capability must be verified against the selected cable and connected electronics.

H-MTD LiDAR Cable

 

Custom H-MTD and MATEnet LiDAR Cable Assemblies

Premier Cable supports custom automotive cable assemblies for LiDAR, radar, and other ADAS equipment. A harness can be configured around the Rosenberger E6K14M connector with the required cable type, length, wire allocation, shielding, and far-end interface. Depending on the vehicle architecture, projects may call for an H-MTD LiDAR cable, an H-MTD radar cable, or an H-MTD to MATEnet connection. MATEnet LiDAR and radar cable assemblies are also an option when MATEnet is the specified interface at the opposite end.

 

For a quotation, provide the LiDAR model, connector part number, mating interface details, pinout, cable length, and installation environment. Premier Cable can review these requirements and prepare a cable assembly to match the application drawing.

 

You Might Also Like

NETBridge To H-MTD Automotive LiDAR Wire Harness 1

NETBridge To H-MTD Automotive LiDAR Wire Harness

NETBridge To MATEnet Automotive LiDAR Wire Harness 1

NETBridge To MATEnet Automotive LiDAR Wire Harness

NETBridge Automotive Ethernet Cable For Laser LiDAR 1

NETBridge Automotive Ethernet Cable For Laser LiDAR

Send Inquiry

whatsapp

Phone

E-mail

Inquiry