USB To CAN Converter Cable With 4 Pin Open Wire Ferrules

PCM Cable Co., Ltd. is one of the leading usb to can converter cable with 4 pin open wire ferrules manufacturers and suppliers in China. Welcome to wholesale high quality customized products at discount price from our factory. Contact us for quotation and free sample.

The USB to CAN Converter Cable with 4 Pin Open Wire Ferrules connects a computer to a CAN bus through a USB interface and four individually terminated wires. The open wire end connects to terminal blocks, controllers, sensors, actuators, and other compatible CAN equipment. It is useful when a device has no M8 socket or exposes its CAN connections through cabinet terminals.

This configuration supports equipment communication, setup, diagnostics, commissioning, and data acquisition. Its key benefit is wiring flexibility: installers can connect the conductors directly to the required terminals.

The assembly provides the physical link between a computer and the CAN network. With the required driver and CAN software installed, the converter allows the computer to transmit and receive CAN messages.

CAN-H and CAN-L connect to the corresponding bus terminals. The computer can then communicate with compatible devices to read data, check communication status, configure supported equipment, or monitor network traffic. Available functions depend on the converter hardware, software, and connected devices.

The ferruled wire ends can be inserted into compatible screw clamp or spring clamp terminals. This makes cabinet wiring more direct and avoids the need for an additional M8 receptacle.

This USB to CAN converter cable is suitable for industrial equipment and development setups where a computer is used for CAN configuration or diagnostics.

• PLC and Controller Systems: Connect a computer to a CAN interface for supported monitoring, configuration, or troubleshooting.
• Sensors and Actuators: Communicate with compatible CAN enabled field devices.
• Industrial Automation: Commission and diagnose equipment with terminal based CAN connections.
• Data Acquisition: Connect a PC to CAN devices to collect or review network data.
• Laboratory Testing: Provide an accessible wired interface for CAN development and debugging.

Premier Cable can review USB to CAN cable requirements for industrial communication, diagnostics, and equipment integration. Custom details may include cable length, conductor identification, ferrule termination, wire assignment, and cable construction.

To discuss a configuration, provide the converter or equipment model, CAN pinout, terminal information, required cable length, and computer side USB connector details. This information helps align the cable assembly with the intended system wiring.

Contact Premier Cable to discuss a USB to CAN converter cable with four open wire ferrules for your industrial equipment or CAN test setup.

Hot Tags: usb to can converter cable with 4 pin open wire ferrules, suppliers, manufacturers, factory, customized, wholesale, quotation, free sample