M8 A-Coding 4 Pin T Splitter

PCM Cable Co., Ltd. is one of the leading m8 a-coding 4 pin t splitter manufacturers and suppliers in China. Welcome to wholesale high quality customized products at discount price from our factory. Contact us for quotation and free sample.

 

 

The M8 A Code 4 Pin T Splitter is designed to provide a convenient branch connection for integrated servo motors and industrial automation equipment. Featuring one M8 A code 4 pin male connector and two M8 A code 4 pin female connectors, this T-shaped splitter allows two compatible connections to branch from a single connection point.

 

Designed for integrated low voltage servo motors and integrated stepper servo motors, this IP67 rated M8 tee splitter creates a practical branch point for power or signal wiring in compact automation systems.

 

Its T-shaped layout helps organize compatible M8 connections around motors, sensors, and actuators. The connector layout and pin assignment must match the equipment wiring diagram.

 

 

The splitter has one M8 A code 4 pin male connector as the input and two M8 A code 4 pin female connectors as the outputs. This 1-to-2 configuration allows two compatible connections to branch from one mating interface.

 

Product Name	M8 Connector T Splitter
Input	1 × M8 A Code 4 Pin Male Connector
Output	2 × M8 A Code 4 Pin Female Connectors
Waterproof Rating	IP67
Applications	Servo Motors, Sensors, Actuators
Custom Coding	Available
Custom Pin Assignment	Available

 

 

 

The male connector mates with a compatible M8 female port or cable. The two female connectors provide branch interfaces for compatible M8 male connectors, creating a shared connection point in the machine wiring layout.

 

In an integrated servo motor installation, the splitter can be positioned near the motor or along the equipment wiring route, depending on available space. The two branch ports connect to devices or cable assemblies specified by the system designer.

 

A T splitter is a connector distribution component; it does not convert communication protocols or define control logic. Its electrical use depends on the internal pin mapping. Before installation, confirm that the contacts are connected as required and that the devices are designed to share the relevant circuit.

 

 

 

 

The M8 A Code 4 Pin T Splitter is intended for compact automation equipment that uses M8 A code connections. Typical application areas include:

 

• Integrated Low Voltage Servo Motors: Provides a branch connection within motor wiring layouts that require two M8 connections.
• Integrated Stepper Servo Motors: Helps organize wiring around compact motor assemblies and motion control equipment.
• Industrial Sensors and Actuators: Provides a branch point for compatible M8-connected devices where the system design calls for a tee configuration.
• Automation Equipment: Supports cable routing in machinery, production equipment, and distributed device installations.

 

The devices connected to each branch must be selected according to the system architecture and approved pin assignment.

 

 

 

Premier Cable supports custom coding and pin assignments for this M8 A code 4 pin T splitter. These options help align the connector configuration with the interfaces and wiring requirements of a specific servo motor or automation system.

 

For a custom configuration, provide the equipment model, connector details, wiring diagram, required pin mapping, and application environment. This information helps establish the connection arrangement before production.

 

Contact Premier Cable with your interface and wiring requirements to discuss an M8 A Code 4 Pin T Splitter for your integrated servo motor or automation project.

 

 

Hot Tags: m8 a-coding 4 pin t splitter, suppliers, manufacturers, factory, customized, wholesale, quotation, free sample