USB To USB Null Modem Cable by FTDI

Description

The FTDI chip null modem cable is a modern replacement for the traditional serial null-modem cable. It allows a user to connect two PCs using their USB ports. The user can then perform file transfers between the PCs via the USB interface. This cable contains a small internal electronic circuit board, encapsulated into the USB connector at both ends of the cable. The electronic is based on the FTDI FT232R USB to serial UART IC and it handles all the USB signaling and protocols. This cable is a USB powered with 2.0 full speed compatible and 2.5m cable that supports data transfer rate up to 3Mbaud at TTL levels.

Product Specification

Features

• Based on back to back FTDI FT232RQ devices
• Entire USB protocol handled by USB connector encapsulated electronics
• Lower operating (20mA) and USB suspend mode current (70μA)
• Operating temperature ranges between -40°C and 85° C
• Support for USB suspend and resume
• UHCI/OHCI/EHCI host controller compatible
• USB 2.0 full speed compatible
• USB Type A connector on both ends of cable

Applications

• File transfer between PCs
• Password protected file transfer between PCs
• PC to PC networking using USB port
• Industrial
• Communications & Networking
• Consumer Electronics

Hot Tags: usb to usb null modem cable by ftdi, suppliers, manufacturers, factory, customized, wholesale, quotation, free sample, USB To USB Null Modem Cable, FTDI USB Null Modem Cable, USB RS485 to M8 M12 Serial Conversion Cable, USB Male to Mini USB 8P Male Cable with FTDI Chip, USB Headset Adaptor Use Plantronics RJ9, USB Adapter RJ9 Headset to USB