Termination Resistors NMEA2000 Mini-C

PCM Cable Co., Ltd. is one of the leading termination resistors nmea2000 mini-c manufacturers and suppliers in China. Welcome to wholesale high quality customized products at discount price from our factory. Contact us for quotation and free sample.

 

 

Description

 

The DeviceNet Mini-C Termination Resistor is a passive electrical component used in DeviceNet networks to terminate the signal line and prevent signal reflections. The termination resistor is typically installed at each end of the network to absorb any electrical noise and reflections that may occur when the signal is transmitted over long distances.

 

 

Applications

 

1. Industrial automation: DeviceNet networks are commonly used in industrial automation applications to connect various devices and sensors, such as programmable logic controllers (PLCs), motor drives, and sensors. The Mini-C Termination Resistor is used to ensure reliable communication between these devices.

 

2. Material handling: DeviceNet networks are often used in material handling applications, such as conveyor systems and automated storage and retrieval systems. The Mini-C Termination Resistor is used to ensure that communication between devices is reliable and error-free, which is critical for maintaining the efficiency and safety of the system.

 

3. Packaging machinery: DeviceNet networks are commonly used in packaging machinery to control and monitor various aspects of the packaging process, such as filling, labeling, and sealing. The Mini-C Termination Resistor is used to ensure that the communication between devices is reliable and that the packaging process is accurate and efficient.

 

4. Factory automation: DeviceNet networks are widely used in factory automation applications to connect various devices, sensors, and machines. The Mini-C Termination Resistor is used to ensure reliable communication between these devices and to prevent errors and downtime in the production process.

 

Specifications

 

Product Name	NMEA 2000 Mini Termination Resistor
Resistance	121 ohms
Maximum Voltage	125 VDC
Maximum Current	250 mA
Operating Temperature:	-40°C to 85°C (-40°F to 185°F)
Connector type	5-pin mini-Change connector

 

By properly terminating the signal line with the DeviceNet termination resistor 7/8" plug, the quality and reliability of the network are improved, resulting in fewer errors and improved data transmission rates.

 

 

FAQ

 

Q: How many termination resistors are required on an NMEA 2000 network?

A:  

When setting up an NMEA 2000 network, it is essential to ensure that the network is properly terminated. Termination resistors are used to prevent signal reflections that can cause data errors and system malfunctions.

 

The NMEA 2000 standard recommends that a minimum of two termination resistors be installed on each network. One resistor should be connected to each end of the network, at the nodes farthest from the power source.

 

In larger networks, or those with more complex configurations, additional termination resistors may be required. In general, it is recommended to have one termination resistor for every 60 to 80 feet (18.3 to 24.4 meters) of cable length.

 

Properly terminated NMEA 2000 networks offer reliable and accurate data transmission, ensuring that all devices on the network can communicate with each other seamlessly. By following the guidelines for termination resistor placement, boaters can ensure that their NMEA 2000 network operates smoothly and efficiently.

Hot Tags: termination resistors nmea2000 mini-c, suppliers, manufacturers, factory, customized, wholesale, quotation, free sample