IX A-Type to RJ45 Female Industrial Ethernet Cable: Features, Applications and Selection Guide
Learn how an IX B-Type to RJ45 panel mount industrial Ethernet cable combines 26AWG CAT6A SFTP construction, dual shielding, TPU jacket and screw-mounted RJ45 connectivity for PLCs, robotics, industrial switches and automation systems.
PCM-HD-0290 is an IX A-Type to RJ45 female industrial Ethernet cable available in 0.2m and 2m lengths. It uses 26AWG CAT6A S/FTP cable, TPU jacket, foil and braid shielding, drain wire and gold-plated contacts for compatible 10Gbps and PoE industrial networks.
Quick Product Introduction
PCM-HD-0290 provides a compact IX A-Type industrial connector on one end and an RJ45 female interface on the other, using CAT6A S/FTP cable for compatible high-speed industrial Ethernet systems.
| Product Name | IX A Type to RJ45 Female Industrial Ethernet Cable |
| Premier Cable P/N | PCM-HD-0290 |
| Connector A | IX40G-A-10S-CV A-Type Male |
| Connector B | RJ45 CAT6 Female |
| Length | 0.2m/2m |
| Cable Type | CAT6A S/FTP |
| Wire Gauge | 26AWG |
| OD | 6.5+0.2mm |
| Max Data Rate | Up to 10Gbps |
PCM-HD-0290 vs Standard RJ45 Extension Cable
| Comparison | PCM-HD-0290 | Standard RJ45 Extension Cable |
|---|---|---|
| IX A-Type | Yes | No |
| RJ45 Female | Yes | Yes |
| Compact Equipment Interface | Excellent | Moderate |
| PLC/ Embedded System | Strong | General |
What Is an IX A-Type to RJ45 Female Ethernet Cable?
An IX A-type to RJ45 female industrial Ethernet cable is:
IX Industrial Connector → Shielded Ethernet Cable → RJ45 Female Receptacle a high-speed passive Ethernet connection component with structure.
It mainly solves the physical interconnection problem between two interface ecosystems:
One end connects to compact IX industrial Ethernet devices;the other end connects standard RJ45 network cables or network devices via an RJ45 female connector.
Therefore, it can be used as:
IX Equipment - RJ45 Network Infrastructure a physical connection bridge between them.
Note:
IX to RJ45 Cable ≠ Ethernet Protocol Converter
It does not convert Ethernet protocol; only reconfigures the physical interface format.
Why Use IX in Industrial Equipment ?
The advantage of traditional RJ45 interfaces is high standardization, but they have relatively largersize.
For:
Industrial cameras, PLC modules, embedded computing devices, and compact network controllers,
The internal PCB space inside the equipment is very valuable.
The IX connector through a more compact mechanical structure can help reduce:
Panel Space + PCB Footprint
Therefore, it is especially suitable for small-scale industrial equipment
Common Industrial Ethernet Challenges
Core Product Value
PCM-HD-0290
The core product value of PCM-HD-0290 can be summarized as follows:
◆ Compact IX A-Type Industrial Interface
Features an IX40G-A-10S-CV A-Type 10-pin connector, providing a compact physical network interface for space-constrained industrial equipment. The A-Type coding helps identify the correct interface and reduces the risk of mismating with differently coded connectors.
◆ CAT6A S/FTP High-Speed Transmission Structure
Uses four pairs of 26AWG twisted conductors, with individual AL/MYLAR shielding for each pair, plus an overall braided shield and drain wire. This structure provides a solid physical foundation for high-speed signal transmission, interference resistance and EMC performance in compatible 10Gbps industrial Ethernet links.
◆ Flexible RJ45 Female Connectivity
The opposite end features an RJ45 CAT6 female connector, allowing connection through standard RJ45 Ethernet patch cables to industrial switches, control cabinets, industrial PCs, network panels and other Ethernet devices. It provides a flexible way to integrate IX-equipped devices into conventional RJ45 network infrastructure.
◆ Integrated Data and PoE Connectivity
Designed for use in compatible PoE Ethernet systems, enabling network data and device power to share the same Ethernet link. It is suitable for industrial cameras, sensors, network modules and related equipment. The actual PoE standard, available power level and compatibility should be verified according to the PSE, PD and complete system configuration.
Products Display
Similar products
Compatibility Statement
Compatibility Verification
PCM-HD-0290 uses an IX40G-A-10S-CV A-Type 10-pin interface and an RJ45 female connector for industrial Ethernet interconnection. Similar connector appearance or pin count does not guarantee direct compatibility.
Before installation, verify IX A/B coding, connector gender, mechanical dimensions, RJ45 pin assignment, four differential-pair mappings, shielding configuration, Ethernet PHY and network protocol requirements to avoid physical mating without successful data communication.
Technical Compatibility Notice
- PCM-HD-0290 uses CAT6A S/FTP shielded cable to provide the physical transmission foundation for up to 10Gbps Ethernet and PoE applications. Actual link speed, power-delivery capability and EMC performance still depend on IX/RJ45 termination quality, device PHYs, pin mapping, cable length, shielding and grounding, as well as the applicable PoE standard and power class.
- PoE-capable cabling does not mean every connected device will automatically receive power; PSE, PD and power-negotiation compatibility must also be verified.
How to choose an IX Type A to RJ45 industrial Ethernet cable ?
How Do I Verify IX A-Type Compatibility ?
Verify the exact IX connector part number, coding, gender and pin count before selection.
How Do I Verify the Pin Mapping ?
Verify the exact IX-to-RJ45 pair mapping rather than inferring it from connector contact count.
How Do I Verify PoE Compatibility ?
Verify the PSE, PD, PoE class, pair mapping, conductor resistance and connector temperature performance.
Should I Choose 0.2m or 2m ?
Use 0.2m for compact internal interconnects and 2m where more routing distance is required.
Customization Capabilities
↕ IX Connector Customization
IX coding, gender and mechanical configuration can be customized to match equipment requirements.
□ RJ45 Connector Customization
RJ45 male, female, shielded and panel-mount structures can be customized.
◉ Cable Length Customization
Cable lengths can be customized with high-speed validation recommended for each configuration.
⚙ Custom Pin Assignment
IX-to-RJ45 pair mapping can be customized according to the customer's network design.
⌘ PoE Configuration
PoE configurations can be developed according to power class, conductor resistance and equipment requirements.
◇ Jacket and Cable Customization
Jacket material, color, cable diameter and conductor gauge can be customized.
Conclusion：
PCM-HD-0290 combines compact IX A-Type industrial connectivity with standard RJ45 network access, CAT6A S/FTP cabling, up to 10Gbps capability and PoE support.
Actual system performance must always be verified from the complete Ethernet channel, including connector coding, pin mapping, device PHY, PoE class, grounding and mating network components.
Product FAQ
Are IX A and B Types Interchangeable ?
No. IX A and B types use different mechanical coding.
Why Is the Cable CAT6A but the RJ45 Female Rated CAT6 ?
Component ratings should be treated separately, and complete assembly performance should be verified through high-frequency testing.
What Is the Advantage of S/FTP ?
S/FTP improves pair isolation and external EMI protection.
How Do I Verify Compatibility ?
Provide the equipment model, exact IX connector, coding, pinout, Ethernet speed, PoE requirement, length and grounding design for engineering verification.
Does the CAT6 RJ45 Female Limit the Whole Cable to CAT6 ?
The cable is specified as CAT6A S/FTP while the RJ45 female connector is listed as CAT6. Complete link performance should therefore be validated as an assembled channel rather than inferred from cable category alone.
What is the difference between Type IX A and Type IX B ?
IX A and B types use different mechanical coding and should not be assumed to be interchangeable.
