RJ45 GigE Vision Industrial Camera Data Cable: Features, Applications and Selection Guide
Learn how the PCM-S-0565 RJ45 GigE Vision camera cable combines CAT6A 10GbE capability, M2 horizontal locking, 26AWG high-flex construction and dual shielding for machine vision, industrial cameras, robotics and automation systems.
PCM-S-0565 is a 2m/5m CAT6A GigE Vision industrial camera cable using 26AWG high-flex PVC cable, foil and braid shielding, an M2 horizontal locking RJ45 male connector and a standard RJ45 male connector for compatible high-speed machine vision systems.
Quick Product Introduction
PCM-S-0565 is a CAT6A high-flex industrial Ethernet camera cable featuring an M2 horizontal locking RJ45 connector, dual shielding and up to 10GbE link capability for compatible machine vision equipment.
| Product Name | RJ45 GigE Vision Industrial Camera Data Transmission Cable |
| Premier Cable P/N | PCM-S-0565 |
| Connector A | RJ45 8P8C Male with M2 Lock |
| Connector B | RJ45 8P8C Male |
| Length | 2m/5m |
| Cable Category | CAT6A |
| Gauge | 26AWG |
| Cable OD | 6.6mm |
| Application | GigE Vision / Machine Vision |
PCM-S-0565 vs Standard CAT6A RJ45 Cable
| Comparison Items | PCM-S-0565 | Standard CAT6A RJ45 Cable |
|---|---|---|
| RJ45 8P8C | Yes | Yes |
| CAT6A | Yes | View Products |
| Up to 10GbE | Yes | View Products |
| High-Flex Cable | Yes | Usually No |
What Is an RJ45 GigE Vision Industrial Camera Cable?
The RJ45 GigE Vision industrial camera data transmission cable is a type used for industrial cameras and:
Industrial PC / Frame Grabber / Ethernet NIC / Vision Controller / Industrial Switch
Industrial network beams that transmit Ethernet image data between each other.
PCM-S-0565 through:RJ45 - CAT6A Shielded Twisted Pair - RJ45 Establish high-speed Ethernet physical connection.
One end adds an M2 horizontallocking structure, enabling mechanical fixation with industrial cameras having corresponding mounting holes.
What Is GigE Vision ?
GigE Vision is an industrial machine-vision communication standard based on Ethernet infrastructure, enabling image-data transmission, device discovery, and camera control between industrial cameras and vision-processing systems.
A typical architecture consists of Industrial Camera → Ethernet Cable → NIC / Industrial Switch → Vision PC → Image Processing Software.
Compared with some proprietary camera interfaces, Ethernet-based vision systems offer standardized networking, longer cabling capability, a mature hardware ecosystem, and flexible network topology for machine vision, automated inspection, robotic vision, and industrial imaging applications.
Common Machine Vision Connectivity Challenges
Core Product Value
PCM-S-0565
The core product value of PCM-S-0565 can be summarized as follows:
◆ CAT6A High-Speed Machine Vision Transmission
PCM-S-0565 features a CAT6A high-speed network architecture designed for GigE Vision industrial cameras and machine vision systems. It provides a reliable physical transmission foundation for high-resolution images, continuous video streams, and control data, supporting up to 10GbE applications when the complete channel and connected equipment are compatible.
◆ M2 Locking RJ45 Connection
Compared with conventional non-locking RJ45 connectors, PCM-S-0565 uses an M2 horizontal locking RJ45 structure to improve mechanical connection stability and reduce accidental disconnection caused by vibration, movement, or continuous operation. It is well suited for machine vision, industrial cameras, robotic vision, and automated production equipment.
◆ High-Flex Cable & Dual Shielding
The 26AWG high-flex cable balances high-speed transmission, flexibility, and equipment wiring requirements. Combined with foil + braided shielding, it helps reduce electromagnetic interference from motors, servo drives, and other industrial equipment, providing improved shielding for high-speed differential signals in electrically demanding environments.
◆ Flexible Lengths & Vision-System Design
PCM-S-0565 is available in 2 m and 5 m lengths for different installation distances between industrial cameras, vision controllers, and network equipment. Its approximately 6.6 mm OD balances shielding, flexibility, and mechanical dimensions. The cable is designed for GigE Vision, industrial cameras, machine vision inspection, and robotic vision systems.
Products Display
Similar products
Compatibility Statement
Compatibility Verification
PCM-S-0565 uses an RJ45 8P8C interface with a connection structure designed with reference to Teledyne FLIR ACC-01-2100 compatibility.
However, mechanical RJ45 mating alone does not guarantee compatibility with every industrial camera. Verify the camera model, M2 locking-hole geometry, RJ45 orientation, pin assignment, differential-pair configuration, Ethernet speed, and camera port specifications before selection.
Technical Compatibility Notice
PCM-S-0565 uses a high-flex CAT6A cable, providing a physical transmission foundation for high-speed Ethernet and potential 10GbE applications. Actual network speed still depends on the camera PHY, NIC, switch, connector termination, shielding continuity, cable length, and complete channel performance.
For robotic, drag-chain, or continuous-motion applications, the minimum bend radius, flex cycles, movement conditions, and verified flex-life performance should also be confirmed.
How to choose a GigE Vision industrial camera cable ?
How Do I Verify Camera and Locking Compatibility ?
Verify the RJ45 port, M2 screw position, locking direction and connector clearance against the camera drawing.
How Do I Choose Between 1GbE and 10GbE ?
Select cable bandwidth according to the camera, NIC and network architecture. A higher-category cable cannot upgrade the camera interface itself.
Fixed or High-Flex Cable ?
For moving systems, evaluate bend radius, travel distance, acceleration and flex-life rather than relying only on the term "high-flex."
How Should Shielding Be Verified ?
Verify shielding continuity from the cable to the RJ45 shield and equipment chassis for effective EMC performance.
Customization Capabilities
↕ Custom Locking RJ45
Locking geometry, screw position and camera-side mechanical retention can be customized.
□ Custom Cable Length
Cable length can be customized according to camera-to-controller distance.
◉ Cable Category Customization
Cable-category and high-speed structures can be selected according to Ethernet bandwidth requirements.
⚙ Flexibility Customization
Flexibility can be customized for fixed, repetitive-motion, robotic or drag-chain applications.
⌘ Jacket Material Customization
PVC, TPU and other industrial jacket materials can be selected according to the operating environment.
◇ OEM/ODM Machine Vision Cable
OEM/ODM machine-vision Ethernet cables can be developed with electrical, high-frequency, shielding and application-specific validation.
Conclusion：
PCM-S-0565 integrates CAT6A Ethernet performance, M2 horizontal locking, dual shielding and high-flex cable construction for demanding machine-vision applications.
The cable should be selected according to the exact camera port, Ethernet speed, locking geometry, motion profile and complete system architecture rather than connector appearance alone.
Product FAQ
Does GigE Vision Mean 10GbE ?
No. GigE Vision and Ethernet link speed are related but not identical concepts.
Why Use M2 Locking ?
M2 locking improves mechanical retention in moving or vibration-prone systems.
Why Use CAT6A ?
CAT6A provides high-bandwidth physical-layer capability for demanding industrial Ethernet imaging applications.
What Does Dual Shielding Do ?
Foil and braid shielding help reduce electromagnetic interference.
Can Other Lengths Be Customized ?
Yes. High-speed validation is recommended after changing cable length.
How Do I Confirm Camera Compatibility ?
Provide the exact camera model, port drawing, locking geometry, Ethernet speed, cable length and motion requirements for compatibility verification.
